Rotameters KOBOLD BGN, KSK, VKD, URM, KSV, etc.

Rotameters KFR, BGN, BGN-R, BGF, KMI-R, KSK, KSM, KDF, KDG, UMR, UXR, URM, URR, URB, UVR, UTR, URL, URK, URA, UTS, DSV-1, DSV-3, KDS, BGK, DSS, SMV, SMO, SMW, SMN, VKP, VKG, VKA, KSV, etc.
- The ultra-low flow rotameter with a KOBOLD KFR-R choke operates on the basis of a proven suspended float system, therefore, the installation position is vertical, and the flow is directed from the bottom up.
- Rotameters BGN-R, BGF-R are suitable for measuring the flow of liquid or gaseous medium in pipes. It shows the current flow rate in volume or mass per unit of time.
- The all-metal rotameter for low flow rates of liquids and gases KMI-R manufactured by KOBOLD is used both in harsh operating conditions and in laboratory conditions. The rotameter includes a tapering measuring tube made of stainless steel.
- Plastic rotameters manufactured by KOBOLD of the KSK-R model are based on the well-known principle of a suspended float. They are used to measure and control flows in closed pipelines. The measured medium enters from below through a conical plastic measuring tube. Thus, the float rises, and the flow rate can be read from the scale. The device can be equipped with two-position switches.
- KSK-R. Technical specifications.
- The operation of the KOBOLD plastic level gauge of the KSM-R model is based on the principle of operation of a float level gauge, in which the float moves freely through the measuring tube without interference or friction. The level indicator is located in the body of the float, at the point where the body has a maximum diameter.
- The principle of operation of rotameters with throttle models KDF-R and KDG-R for liquids and gases is based on the principle of a free-floating float: the installation position is vertical, the flow direction is from bottom to top. These instruments have been developed as simple and economical measuring systems. The float is a ball, the upper point of which serves as an indicator. The needle valve is standard.
- The principle of operation of glass rotameters manufactured by Kobold is the free movement of the float along the body of the rotameter. They are used to measure the flow of liquid or gas in closed pipelines.
- The operation of this float rotameter of liquid manufactured by KOBOLD DSV-R model is based on the well-known principle of operation of the float rotameter of liquids and gases, with the exception of a simple cone-shaped measuring tube.
- The KDS-R rotameter can be used to measure the flow of liquid and gaseous media in pipes. This device shows the flow rate (volume or mass per unit of time).
- The operation of the DSS-R rotameter manufactured by KOBOLD is based on the well-known principle of operation of float rotameters with the exception of a cylindrical tube with cone-shaped troughs. This technology allows you to reduce the size and reduce the cost of the rotameter.
- The operation of the rotameter and the SMV-R switch is based on the well-known principle of operation of float rotameters with the exception of a cone-shaped flow tube. The difference of this patented device is that it is equipped with a cylindrical flow meter tube with cone-shaped troughs located along the entire outer part.
- The all-metal rotameters and models SMW-R and SMO-R manufactured by KOBOLD work on the same principle as the rotameters of the SMV-R model. An additional advantage is the versatility of installation: these rotameters can be installed both in a horizontal position (model SMW-R) and in a vertical position (model SMO-R).
- The KOBOLD rotameter of the SMN-R model is used in conditions where very low switching points are needed along with minimal pressure drops at high flow rates.
- Plastic rotameters manufactured by KOBOLD VKP-R models operate on the basis of the principle of operation of a special spring-loaded float with a cylindrical measuring tube and a damper float equipped with a diaphragm.
- The KOBOLD model VKG-R rotameters and flow relays are equipped with a damper float sliding inside a cylindrical measuring tube, as well as a built-in diaphragm, which is a unique technology.
- The KSV-R low flow rotameter for liquids or air works on the principle of a suspended float. The flow direction is from bottom to top, the mounting orientation is vertical. The reference point is the upper edge of the ball. The device was designed as a simple and at the same time economical measuring device. An additional needle valve allows for economical control. The device is designed to be mounted on a panel.
All KOBOLD products
The group "New Technologies" offers for review the products of the plant KOBOLD: level meters, flow meters, level detectors, rotameters, pressure sensors, pressure gauges, thermal converters, density meters, flow regulators, universal indicators
About KOBOLD
KOBOLD Messring GmbH was founded in 1980 and in subsequent years developed and expanded by Klaus Kobold. Currently, the KOBOLD Group company includes 5 factories located in different countries. The main plant is Heinrichs Cologne (Germany) - the largest plant with an impeccable reputation.
-
quality
The company has implemented a quality control system that allows avoiding errors in production. It also fulfills the highest requirements imposed during production and maintenance. -
WIDE APPLICATION
Kobold devices are widely used in almost all industries. A variety of measurement principles allowed the devices to meet the high specific requirements of various industries. -
CUSTOMER ORIENTATION
The production facilities allow Kobold to achieve the main goal — customer satisfaction. It is thanks to our customers that Kobold thoroughly knows the current needs of the market.
Information Board KOBOLD
Learn more about our products KOBOLD.
NEW TECHNOLOGIES GROUP
For sales and support please contact
Contact us or your local dealer for more information on certifications, features, reviews, pricing, stock availability and delivery terms for KOBOLD products.
Reply guaranteed within 8 business hours
- (727)345-47-04
- (3955)60-70-56
- (8182)63-90-72
- (8512)99-46-04
- (3852)73-04-60
- (4722)40-23-64
- (4162)22-76-07
- (4832)59-03-52
- (8352)28-53-07
- (351)202-03-61
- (8202)49-02-64
- (3022)38-34-83
- (395)279-98-46
- (4932)77-34-06
- (3412)26-03-58
- (4012)72-03-81
- (4842)92-23-67
- (843)206-01-48
- (3842)65-04-62
- (4212)92-98-04
- (8332)68-02-04
- (4966)23-41-49
- (4942)77-07-48
- (861)203-40-90
- (391)204-63-61
- (3522)50-90-47
- (4712)77-13-04
- (4742)52-20-81
- (3519)55-03-13
- (375)257-127-884
- (495)268-04-70
- (8152)59-64-93
- (8552)20-53-41
- (831)429-08-12
- (3843)20-46-81
- (383)227-86-73
- (3496)41-32-12
- (3812)21-46-40
- (4862)44-53-42
- (3532)37-68-04
- (8412)22-31-16
- (342)205-81-47
- (8142)55-98-37
- (8112)59-10-37
- (863)308-18-15
- (4912)46-61-64
- (812)309-46-40
- (846)206-03-16
- (8342)22-96-24
- (845)249-38-78
- (8692)22-31-93
- (3652)67-13-56
- (4812)29-41-54
- (862)225-72-31
- (8652)20-65-13
- (3462)77-98-35
- (8212)25-95-17
- (4752)50-40-97
- (998)71-205-18-59
- (8482)63-91-07
- (3822)98-41-53
- (4872)33-79-87
- (4822)63-31-35
- (3452)66-21-18
- (347)229-48-12
- (3012)59-97-51
- (8422)24-23-59
- (8672)28-90-48
- (4922)49-43-18
- (423)249-28-31
- (844)278-03-48
- (8172)26-41-59
- (473)204-51-73
- (4112)23-90-97
- (4852)69-52-93
- (343)384-55-89
Send your question now: